9
ENGLISH
(Original instructions)
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
SFMCF900
Voltage
V
DC
18
No-load speed
Min
-1
0-1700
Beats BPM 0-2500
Max. torque
(PTI Method)
Nm 475
Chuck
capacity
mm 12.7
Weight kg 2.1
Charger SFMCB11 SFMCB12 SFMCB14
Input Voltage
V
AC
230 230 230
Output Voltage
V
DC
18 18 18
Current A 1.25 2 4
Battery
(not supplied)
SFMCB201 SFMCB202 SFMCB204 SFMCB206
Voltage
V
DC
18 18 18 18
Capacity Ah 1.5 2.0 4.0 6.0
Type Li-Ion Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN62841:
Sound pressure (L
pA
) 94 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 105 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN62841:
Drilling into metal (a
h
) 10.7 m/s
2
, uncertainty (K) 1.5 m/s
2
Supply of Machinery (Safety)
Regulations 2008
Cordless Impact Wrench - SFMCF900
Stanley Fatmax declares that these products described under
“technical data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-2:2014.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact Stanley Fatmax at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical le and makes this declaration on behalf of
Stanley Fatmax
Karl Evans
Vice President Professional Power Tools
Stanley Fatmax UK, 270 Bath Road, Slough
Berkshire, SL1 4DX
United Kingdom
10/09/2021
EC declaration of conformity
MACHINERY DIRECTIVE
%
Cordless Impact Wrench - SFMCF900
STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN62841-1:2015 EN62841-2-2:2014
These products also comply with Directive 2014/30/EU
and 2011/65/EU.
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal le and makes this declaration on behalf of
STANLEY FATMAX.
Patrick Diepenbach
General Manager, Benelux
Stanley,
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
10/09/2021
To Next Page
Loading...
