Why Stanley Drill won't start?
The Stanley Drill might not start due to a couple of reasons: either the battery pack isn't installed correctly, or the battery pack hasn't been charged. To resolve this, first, check that the battery pack is properly installed. Second, make sure to check the battery pack charging requirements.
What to do if my Stanley Drill starts immediately when I insert the battery?
If your Stanley Drill starts as soon as you insert the battery, it's likely that the switch was left in the “on” position. To prevent this, ensure the switch is moved to the “off” position before inserting the battery.
General| Voltage | 18V |
|---|---|
| Chuck Size | 13mm |
| Speed | 2-Speed |
| Drilling Capacity (Metal) | 13mm |
| Type | Cordless Drill Driver |
| Battery Type | Li-Ion |
Describes the applications the drill driver is designed for.
Read all safety warnings, instructions, and specifications provided.
Keep work area clean, avoid explosive atmospheres, and keep bystanders away.
Ensure power tool plugs match outlets and never modify them.
Stay alert, use protective equipment, and prevent unintentional starting.
Use the correct tool, maintain it, and store it safely.
Use correct chargers, avoid damage, and handle batteries safely.
Includes warnings for ear protection, auxiliary handles, and securing work.
Covers user capabilities, child supervision, and inherent risks.
Covers dust hazards, tool labels, charger safety, and product features.
Instructions for charging, LED indicators, and temperature guidelines.
Explains delay for temperature extremes and battery charge indicator.
Guidance on leaving the battery connected for maintenance charging.
Steps for inserting and removing the battery pack from the tool.
Instructions for attaching and positioning the belt hook.
How to insert and tighten drill bits using the keyless chuck.
Using the trigger for speed control and the button for rotation direction.
Adjusting torque settings and selecting speed/torque ranges.
Guidance for performing screwdriving and drilling tasks.
Tips for drilling in wood/metal and using the LED work light.
Identifies problems like unit not starting or battery not charging.
Provides technical details on voltage, speed, torque, and capacity.
Information on service locations, authorized centers, and battery types.
To Next Page
