Stanley FATMAX V20 SFMCST933 - Definitions: Safety Guidelines; SAFETY INSTRUCTIONS; SAFE OPERATING PRACTICES; Training

5
ENGLISH
WARNING: To reduce the risk of injury, read
the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
SAFETY INSTRUCTIONS

WARNING: When using mains-powered
appliances, basic safety precautions, including the
following, should always be followed to reduce the risk of
fire, electric shock, personal injury and materialdamage.

WARNING: When using the machine the
safety rules must be followed. For your own safety and
bystanders please read these instructions before operating
the machine. Please keep the instructions safe for lateruse.
• Read all of this manual carefully before operating theappliance.
• The intended use is described in this manual. The use of any
accessory or attachment or the performance of any operation
with this appliance other than those recommended in this
instruction manual may present a risk of personalinjury.
• Retain this manual for futurereference.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
SAFE OPERATING PRACTICES
Training
a ) Read the instructions carefully. Be familiar with the
controls and the correct use of themachine.
b ) Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of theoperator.
c ) Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
theirproperty.
Preparation
a ) Before use, always visually inspect the machine for
damaged, missing or misplaced guards orshields.
b ) Never operate the machine while people, especially
children, or pets are nearby.
Operation
a ) Wear eye protection and stout shoes at all times while
operating themachine.
b ) Avoid using the machine in bad weather conditions
especially when there is a risk oflightning.
c ) Use the machine only in daylight or good artificiallight.
d ) Never operate the machine with damaged guards or
shields or without guards or shields inplace.
e ) Switch on the motor only when the hands and feet are
away from the cuttingmeans.
f ) Always disconnect the machine from the power
supply (i.e. remove the plug from the mains, remove the
disabling device or removable battery)
• whenever the machine is left unattended;
• before clearing a blockage;
• before checking, cleaning or working on the machine;
• after striking a foreign object;
• whenever the machine starts vibratingabnormally.
g ) Take care against injury to feet and hands from the
cuttingmeans.
h ) Always ensure that the ventilation openings are kept clear
ofdebris.
i ) Remove any objects that may cause kickback, such as
branches androcks.
j ) Check for loose fasteners and damaged parts, such as cracks in
the cuttingattachment.
Maintenance and Storage
a ) Disconnect the machine from the power supply
(i.e. remove the plug from the mains, remove the
disabling device or removable battery) before carrying out
maintenance or cleaningwork.
b ) Use only the manufacturer’s recommended replacement
parts andaccessories.
c ) Inspect and maintain the machine regularly. Have the
machine repaired only by an authorizedrepairer.