Need help?Do you have a question about the Stanley STR-750 and is the answer not in the manual?
General warning symbol indicating potential hazards.
Instruction to read the manual before commissioning the machine.
Recommendation to wear goggles, helmet, and ear protection.
Prohibition against using metal blades for cutting.
Recommendations for wearing sturdy shoes and protective gloves.
Advice to protect the device from rain or humidity.
Warning to be mindful of parts being ejected during operation.
Safety step: turn off and remove spark plug before maintenance.
Requirement for a minimum distance of 15m for people.
Alert regarding hot components and the need to stay away.
Information on the guaranteed sound power level.
Defines the product's purpose for trimming lawns and grass.
Guidance for user training and familiarization with the machine.
Steps and precautions to take before operating the machine.
Instructions and precautions during machine operation.
Guidelines for upkeep and proper storage of the machine.
Precautions and procedures for safe fuel handling.
Potential hazards and procedures for emergency situations.
Methods to minimize exposure to vibration and noise.
List of all parts of the grass trimmer with corresponding numbers.
Instructions for attaching the auxiliary handle to the shaft.
Steps for connecting the upper and lower shaft sections securely.
Instructions for fitting and securing the safety guard.
Steps to attach the trimmer head and spool assembly.
Important warnings and steps for safely fueling the machine.
Procedures for starting the engine, including cold and warm starts.
Procedure for safely shutting down the engine.
How to change the angle of the gear head for different tasks.
Instructions for using the machine to trim grass and weeds.
Advice for achieving best results and safe operation.
Instructions for storing the machine properly when not in use.
Procedures for routine cleaning to maintain the machine.
Care and maintenance of cutting components and safety guards.
Procedures for inspecting, cleaning, and replacing the air filter.
Instructions for fuel management and fuel filter checks.
Steps for inspecting, cleaning, and replacing the spark plug.
Guidance on carburettor adjustments and silencer maintenance.
Steps for refilling or replacing the cutting line spool.
Details on displacement, power, speeds, and tank capacity.
Information on cutting width, string thickness, and machine weight.
Measurements for sound pressure, sound power, and vibration.
Common causes and corrections for engine not starting.
Common causes and corrections for the engine stopping.
Causes and corrections for bad cutting performance.
Causes and corrections for excessive vibration, noise, or smoke.
Guidelines for disposing of fuel, oil, and soiled items responsibly.
Instructions on keeping and recycling the product packaging.
Request for users to contribute to resource preservation via collection centers.
Declaration of compliance with relevant EU directives and standards.
Information on the authorized representative for technical documentation.
Details on product quality, warranty duration, and claim verification.
Conditions and damages that are excluded from the guarantee.
Instructions for submitting a warranty claim and contacting after-sales service.
To Next Page
General
