Need help?Do you have a question about the Stanley FMC625 and is the answer not in the manual?
General| Torque (max) | 51.4 N⋅m |
|---|---|
| Number of gears | 2 |
| Torque settings | 22 |
| Chuck capacity (min) | 1.5 mm |
| Idle speed (1st gear) | 400 RPM |
| Idle speed (2nd gear) | 1600 RPM |
| Impact rate (low speed) | 6800 bpm |
| Impact rate (high speed) | 27200 bpm |
| Drilling diameter in wood (max) | 38 mm |
| Drilling diameter in concrete (max) | 13 mm |
| Soft grip | Yes |
| Product color | Black, Yellow |
| Product design | Pistol grip drill |
| Power source | Battery |
| Charging time | 60 min |
| Battery voltage | 18 V |
| Battery capacity | 2 Ah |
| Number of batteries included | 2 pc(s) |
Weight and Dimensions| Depth | 55 mm |
|---|---|
| Width | 230 mm |
| Height | 220 mm |
| Weight | 1800 g |
To Next Page