Need help?Do you have a question about the Stanley FATMAX FMC625 H1 and is the answer not in the manual?
General| Type | Cordless Drill |
|---|---|
| Voltage | 18V |
| Chuck Size | 13mm |
| Max Torque | 51Nm |
| Speed Settings | 2 |
| Battery Type | Li-Ion |
| Power Source | Battery |
| No Load Speed | 0-400/0-1600 RPM |
| Drilling Capacity (Metal) | 13mm |
| Number of Gears | 2 |
Essential safety guidelines for operating power tools, covering work area, electrical, and personal safety.
Recommendations for using Stanley Fat Max chargers with compatible batteries and avoiding water exposure.
Steps for changing screwdriver bits and drill bits using the keyless chuck.
Procedure for charging the battery, indicator lights, and charger diagnostics.
Guidance on selecting modes and torque settings for drilling and screwdriving applications.
Specific settings for hammer drilling in masonry and adjusting the speed selector.
To Next Page