Need help?Do you have a question about the Stanley FMC625 and is the answer not in the manual?
General| Torque (max) | 51.4 N⋅m |
|---|---|
| Number of gears | 2 |
| Torque settings | 22 |
| Chuck capacity (min) | 1.5 mm |
| Idle speed (1st gear) | 400 RPM |
| Idle speed (2nd gear) | 1600 RPM |
| Impact rate (low speed) | 6800 bpm |
| Impact rate (high speed) | 27200 bpm |
| Drilling diameter in wood (max) | 38 mm |
| Drilling diameter in concrete (max) | 13 mm |
| Soft grip | Yes |
| Product color | Black, Yellow |
| Product design | Pistol grip drill |
| Power source | Battery |
| Charging time | 60 min |
| Battery voltage | 18 V |
| Battery capacity | 2 Ah |
| Number of batteries included | 2 pc(s) |
Weight and Dimensions| Depth | 55 mm |
|---|---|
| Width | 230 mm |
| Height | 220 mm |
| Weight | 1800 g |
Essential safety for work area, electrical, and general operator practices.
Focuses on operator alertness, PPE, and correct tool handling.
Proper usage, care, storage, and maintenance of the power tool.
Guidelines for charging, using, and storing battery packs safely.
Requirements for tool servicing and specific safety for drills.
Information on vibration levels and potential inherent risks.
Critical safety precautions for batteries and chargers.
Electrical safety notes and an overview of the tool's key features.
Step-by-step guide for battery pack insertion and extraction.
Procedure for securely fitting and removing drill and screwdriver bits.
Instructions for charging, charger diagnostics, and battery care.
Adjusting rotation direction and torque collar for various applications.
Operating modes for masonry, speed selection, and general use.
Practical advice for efficient use and routine tool maintenance.
Guidelines for environmentally responsible disposal of batteries and products.
Detailed technical specifications for the tool, chargers, and batteries.
Measured sound pressure, sound power, and vibration emission values.
To Next Page