Need help?Do you have a question about the Stanley FatMax V20 SFMCD700 and is the answer not in the manual?
General| Voltage | 20V |
|---|---|
| Chuck Size | 1/2 inch |
| Speed Settings | 2 |
| Battery Compatibility | Stanley FatMax V20 |
| Drill Type | Cordless |
| Battery Type | Lithium-Ion |
| No Load Speed | 0-450, 0-1, 500 RPM |
Read all safety warnings, instructions, illustrations, and specifications provided.
Keep work area clean and safe, and follow electrical safety precautions.
Stay alert, use PPE, prevent unintentional starting, and dress properly.
Use, care for tools and maintain them safely.
Handle, charge, and dispose of batteries safely.
Brace the tool properly and hold by insulated gripping surfaces.
Use sharp bits, support work, apply pressure correctly, and minimize stalling.
Wear ear protectors, use auxiliary handles, secure workpieces, and check for wiring.
Ensure children are supervised and be aware of residual risks.
Declared vibration emission values measured according to standard test methods.
Pictograms and date code shown on the tool.
Never open batteries, avoid water, charge within temperature limits, use correct charger.
Charger is double insulated, check voltage, do not replace plug.
List of appliance features including trigger switch, torque collar, and LED light.
Charge before first use and when power is low, avoid extreme temperatures.
Ensure lock-off button is engaged before installing or removing.
Use belt hook only for hanging tool from a work belt; do not suspend overhead.
Grasp chuck, rotate counterclockwise to insert, clockwise to tighten.
Control ON/OFF, speed, and rotational direction.
Set collar for operating mode and torque for tightening screws.
Shift gears for low speed/high torque or high speed/low torque.
Guidance for driving fasteners and drilling in wood and metal.
Integrated light illuminates the work area when the trigger is pulled.
Common problems and their possible solutions.
Clean ventilation slots and motor housing regularly.
Dispose of products and batteries according to local provisions.
Specifications for the drill and batteries.
To Next Page