Stanley IntelliLaser Pro User Manual

Intelli
LLaasseerr
™
PPrroo
(77-500)
Main Stud Sensing/Laser Unit
The Stanley
®
Intelli
LLaasseerr
™
PPrroo
uses electronic signals
to locate the position of studs, joists or live AC wires
through drywall and other common wall materials.
Once the edge of the stud has been detected, the
Intelli
LLaasseerr
™
PPrroo
LCD display gives visual and audio
indications that allow you to easily pinpoint the stud’s
edge position. A pencil line allows you to quickly note
the location of the stud edges.
The Stanley
®
Intelli
LLaasseerr
™
PPrroo
stud sensor generates
a vertical laser plane. The unit can also be tilted to
produce a laser plane at any angle.
The Intelli
LLaasseerr
™
PPrroo
allows the user to locate wood
and metal studs through common wall materials up
to 1
1
/
2
inches thick.
The Intelli
LLaasseerr
™
PPrroo
provides automatic calibration ,
a backlit LCD screen, auto shut off and heavy duty
ABS construction.
Depth detection selected by side button for
1
/
2
inch,
1 inch and 1
1
/
2
inch.
–2–
114C IM 14Aug06 8/14/06 7:40 PM Page 3

Stanley IntelliLaser Pro Specifications

General

Power Source	Battery
Battery Type	AA
Laser Wavelength	635 nm
Self-Leveling Range	+/- 4 degrees
Self-Leveling	Yes
Warranty	1 year
Accuracy	+/- 1/8 inch at 30 feet
Battery Life	Up to 20 hours
Outdoor Use	Yes, with detector