Stanley PW6655 - Hose Connections; High Pressure Hose to Pump; High Pressure Hose to Gun; Garden Hose Inlet Connection

12 13
Hose to Pump
Pic. 5
1. Attach the high pressure hose to the pump. Pull back collar
and push male connector in fully. Release collar. Ensure
that the hose does not touch the muffler or goes over the
top of the fuel tank.
2. Have hose lay to the back of the pump and curve to the
hose hanger.
Note: Do not allow high pressure hose to touch the muffler.
Damage will occur and will not be covered by warranty.
PIC. 5
PIC. 6
PIC. 7
Hose to Gun
Pic. 6
Attach the high pressure hose to the gun. Pull back collar and
push male connector in fully. Release collar.
Note: Do not allow high pressure hose to touch the muffler.
Damage will occur and will not be covered by warranty.
Garden Hose Connection
Pic. 7
Screw black quick connection and tighten by hand only.