Need help?Do you have a question about the Stanley SC16 and is the answer not in the manual?
Tool designed for wood cutting applications, intended for professional use.
Explains DANGER, WARNING, CAUTION, NOTICE and symbols for electric shock and fire.
Covers work area, electrical, personal safety, and tool use/care. Read all warnings.
Covers cutting procedures, kickback, lower guard safety, and material handling.
Includes ear protection, dust mask, blade specifications, and avoiding abrasive wheels/water feed.
Tool not for use by unsupervised children or persons with reduced capabilities.
Lists risks like hearing impairment, injury from particles, burns, prolonged use, and dust.
Stresses using qualified personnel for power cord repair to avoid injury or warranty void.
Recommends approved 3-core cables, minimum conductor size, and maximum length for safe operation.
Lists the standard items included with the circular saw, such as the saw, blade, wrench, and manual.
Identifies main parts like trigger switch, handles, blade lock, base plate, and guards.
Ensures correct supply voltage and advises checking for hidden utility lines before operation.
Warning to disconnect tool from power source before any adjustments or accessory changes.
Step-by-step guide to install a saw blade, ensuring correct rotation and alignment.
Instructions for loosening and removing the old blade, including using the blade lock.
Emphasizes the guard's importance, proper closing, and servicing if not functioning correctly.
Warnings about eye protection, foreign objects, and using clean, sharp, correctly specified blades.
Guide on how to adjust the depth lever and set the blade depth for efficient cutting.
Instructions on using the knob and foot plate to adjust the bevel angle between 0° and 45°.
Explains the kerf indicator on the saw shoe for guiding cuts and base plate notches for angles.
Steps to mount and adjust the parallel fence for cutting parallel to the workpiece edge.
Emphasizes supporting the work properly and holding the saw firmly to prevent loss of control and kickback.
Safe practices for cutting, avoiding kickback, managing saw stalls, and finishing cuts.
Guidance on ripping wider boards into narrower strips, recommending parallel fence use.
Instructions for making pocket cuts safely, avoiding raising the saw off the surface.
Recommendations for cleaning ventilation slots, motor housing, and seeking professional service.
States that the power tool requires no additional lubrication.
Warnings on using dry air for cleaning, wearing protection, and avoiding harsh chemicals.
Ensures the lower guard closes freely and explains cleaning or servicing if it malfunctions.
Discusses dull blades, changing blades, and cleaning hardened gum or anti-stick coatings.
Warns against using non-Stanley accessories due to potential hazards and recommends authorized products.
Instructs on separate collection for product disposal instead of household waste.
Provides information on finding company-owned and authorized service locations for repairs and advice.
Lists key technical data including voltage, power input, speed, blade diameter, depth of cut, and weight.
Outlines conditions for warranty claims, including proof of purchase and proper product use.
To Next Page
General