Why is my Stanley SL18116P losing suction during dry pick-up?
If your Stanley Vacuum Cleaner is experiencing a loss of suction during dry pick-up, there are several potential causes. First, the tank might be full, in which case you should drain and clean it. Second, the hose could be clogged; remove the hose and clear any debris. Finally, the filter might be clogged, requiring cleaning or replacement.
What to do if my Stanley SL18116P Vacuum Cleaner loses suction when picking up wet materials?
If your Stanley Vacuum Cleaner is experiencing a loss of suction during wet pick-up, it could be due to a few reasons. First, check if the tank is full; if so, drain and clean it. Second, the hose might be clogged; remove it and clear any obstructions. Lastly, a clogged filter could be the culprit; try cleaning or replacing it.
General| Type | Wet/Dry Vacuum |
|---|---|
| Weight | 27.5 lbs |
| Cord Length | 12 feet |
| Model | SL18116P |
| Category | Vacuum Cleaner |
| Voltage | 120 V |
| Frequency | 60 Hz |
To Next Page
