To Next PageTo Next PageWhy does my Stanley Vacuum Cleaner have loss of suction?
Loss of suction in your Stanley Vacuum Cleaner during dry pick-up can be caused by: * A full tank: drain and clean the tank. * A clogged hose: remove the hose and clean out any obstructions. * A clogged filter: clean or replace the filter.
General| Model | SL18199P |
|---|---|
| Type | Wet/Dry Vacuum Cleaner |
| Cord Length | 10 feet |
| Hose Length | 6 feet |
| Voltage | 120V |
| Frequency | 60Hz |
| Nozzle Type | Crevice Nozzle |
Defines imminent hazards leading to death or serious injury.
Defines potential hazards leading to death or serious injury.
Basic safety precautions for electrical appliances.
Prohibits use with hazardous materials or in specific environments.
Warning about lead exposure and its health effects.
Step-by-step guide for unpacking and assembling the vacuum.
Warnings against using the vacuum in hazardous environments.
Mandates wearing safety goggles during operation.
Solutions for problems like vacuum not running or loss of suction.
