H
hbradfordSep 9, 2025
What to do if Stanley ST-70T-KFA-E won't turn on?
- RRebecca ObrienSep 10, 2025
If your Stanley Heater doesn't turn on and the lamp isn't lit, the temperature limit sensor may have overheated; turn the power switch off and let the heater cool for 10 minutes before turning it back on. Check the power cord and extension cord to ensure a proper connection and test the power supply. Also, the fuse might be blown, so check and replace it if necessary. Inspect all electrical connections between the Temperature Limit Sensor and the Circuit Board.