Stanley STHT77498-1 - Maintenance; Troubleshooting; Service and Repairs

13
GB
Only use STANLEY
®
accessories that are
recommended for use with this model. Accessories
that may be suitable for one laser may create a risk of
injury when used with another laser.
the bottom, side, and back (Figure
C
)
to accommodate current or future
®
accessories.
Other
http://www.STANLEY.com.
Maintenance
•
•
•
•
• Calibration checks and other maintenance repairs
service centers.
Troubleshooting
The Laser Does Not Turn On
•
•
compartment.
•
or corrosion.
•
leakage.
•
• When using rechargeable batteries, make sure the
•
•
operating temperature.
The Laser Beams Flash
When in self-leveling mode, the lasers are designed
to self-level up to an average of 4° in all directions. If
the laser is tilted so much that the internal mechanism
manual mode
level surface.
Laser Beams Will Not Stop Moving
The laser is a precision instrument. Therefore, if it is
not positioned on a stable (and motionless) surface,
Service and Repairs
Note: Disassembling the laser level will void all
warranties on the product.
authorized service centers. Service or maintenance
service
center, go to http://www.STANLEY.com.