GB
16
Maintenance and Care
• When the laser tool is not in use, clean the exterior parts
with a damp cloth, wipe the laser tool with a soft dry cloth
to make sure it is dry, and then store the laser tool in the kit
box provided.
• NEVER use solvents to clean the laser tool.
• Do not store the laser tool at temperatures below ‑10˚C or
above 40˚C.
• To maintain the accuracy of your work, check the laser tool
often to make sure it is properly calibrated.
• Calibration checks and other maintenance repairs must be
performed by Stanley service centers.
End of Life
DO NOT dispose of this product with household waste.
ALWAYS dispose of batteries per local code.
PLEASE RECYCLE in line with local provisions for the collection
and disposal of electrical and electronic waste under the WEEE
Directive.
To Next Page
Loading...
