Stanley T14 - Updating Badge Firmware and Configuration

T14 Patient and Staff Badges
User Guide 14
133 Patient Gen2 120sec
134 Patient Gen2 5min
135 Caregiver Gen1 60sec
136 Caregiver Gen1 5min
137 Caregiver Gen2 60sec
138 Caregiver Gen2 5min
139 Staff Duress Gen1 60sec
140 Staff Duress Gen1 5min
141 Staff Duress Gen2 60sec
142 Staff Duress Gen2 5min
143 Staff Duress Gen2 60sec
144 Staff Duress Gen2 5min
145 Staff Duress Gen2 5min
146 Staff Duress Gen2 5min
157 Staff Duress Gen1 5min
158 Staff Duress Gen1 5min
159 Staff Duress Gen2 5min
160 Staff Duress Gen1 60sec
161 N/A N/A 1sec
For more details on configuring and updating the badges, see the Tag Manager
BD User Guide.
Updating Badge Firmware and Configuration
T14 Patient Badges automatically check for updates (firmware and
configuration) in the following cases:
• 3 (three) minutes after the badge is removed from the charger
• Periodically every 2 (two) days
T14 Staff Badge firmware and configuration updates are performed on
request from a Tag Activator or TED device.
MobileView supports the option to update the T14 Badge configuration and
firmware over the air (wirelessly). A group of badges or badges associated to a
specific category can be configured simultaneously.
For more details see the Tag Manager BD User Guide.