Stanley TLM160 - Page 9

1
Overview
TLM160 1.0.0 gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
TR
RO
BG
User Manual
English
The safety instructions along with
the user manual should be read
carefully before initial operation.
Overview
Keyboard
See drawing{A}:
1 ON/DIST (ON/MEASUREMENT) -key
2 PLUS [+] -key
3 AREA/VOLUME -key
4 UNITS/ (UNITS/ILLUMINATION) -key
5 CLEAR/OFF-key
6 REFERENCE -key
7 MINUS [-] -key
Display
See drawing {B}
1Laser "ON"
2 Reference (front/rear)
3Area/volume
4Battery symbol
5Main targets
6 Units with exponents (
2
/
3
)
7 Second row (e.g. intermediate values)
Start up
Inserting / Replacing Batteries
See drawing {C}. Remove the battery cover, insert the
battery correctly. Close the battery compartment.
Replace the battery when this symbol
constantly blinks in the display.
• Only use alkaline batteries.
• Batteries should be removed due to danger of
corrosion, if the device will not be used for a long
time.
Selecting Units
Possible units:
Press this key until the desired unit is
displayed.
Distance Area Volume
0.000 m 0.000 m² 0.000 m³
0.00 ft 0.00 ft² 0.00 ft³
0' 0''
1
/
16
0.00 ft² 0.00 ft³
0.0 in 0.00 ft² 0.00 ft³
~1 sec.