Contents
• User Safety
• Battery Safety
• Installing AAA Batteries
• Using the TLM50/100
• Warranty
• Specications
Retain all sections of this manual for future
reference.
User Safety
WARNING:
Carefully read the Safety Instructions and
Product Manual before using this product.
The person responsible for the instrument
must ensure that all users understand
and adhere to these instructions.
WARNING:
The following label information is placed
on your laser tool to inform you of the
laser class for your convenience and
safety.
The STHT1-77409/STHT1-77410 tool emit a
visible laser beam, as shown in Figure
A
. The
laser beam emitted is Laser Class 2 per IEC
60825-1 and complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
WARNING:
While the laser tool is in operation, be
careful not to expose your eyes to the
emitting laser beam (red light source).
Exposure to a laser beam for an
extended time period may be hazardous
to your eyes. Do not look into the beam
with optical aids.
WARNING:
If the equipment is used in a
manner not specied by the
manufacturer, the protection
provided by the equipment may be
impaired.
WARNING: To reduce the risk of
injury, user must read the Product User
manual, Laser Safety, and Battery Safety
manuals.
EU-Declaration of Conformity
Stanley herewith declares that the product
STHT1-77409/STHT1-77410 is in compliance
with the essential requirements and all other
provisions of Directive 2014/53/EU.
The full text of the EU Declaration of Conform-
ity can be requested at Stanley Tools, Egide
Walschaertsstraat 14-16, 2800 Mechelen,
Belgien, or is available at the following internet
address: www.2helpU.com.
3
GB
To Next Page
Loading...
Need help?
General
