Stanton C.504 - Back up Memory

02 dIrECt Direct OFF*, ON
When direct mode is set to on, disc can be ejected when disc is played, and when
insert the disc, playback is started automatically.
03 rEAd TOC Read Mode nor*, AUt
Selects the TOC read mode.
nor: Uses the previous servo value.
AUt: Adjust the servo value every time.
04 rECALL Memory Auto Recall Mode nor*, AUt
Selects the track memory recall mode.
nor: Recall the track memory data when recall operation is done.
AUt: Recall the tempo setting, tempo range, KEY setting, Key lock setting, and
BPM value from track memory data when track is selected.
05 FAdEr Cd: Disc playback is started and stopped with the fader.
SAM: Controls the playback of the sampler.
COM: Controls a combination of disc and sampler playback.
06 F PrE Factory Preset - SUrE –
Initialize the preset menu.
07 ALLCLr Memory All Clear - SUrE –
Clear the all memorized data.
* Indicates Factory Default Setting
3-14. Back Up Memory
Each time you turn off the power, the status of following features are stored into backup memo-
ry.
* Time mode
* Play mode
* Brake on/off
* Brake Time
* Key Lock on/off
* Auto Cue on/off
* Relay Play on/off
* Pitch Range
* Memory Bank
* Preset Settings
* Program
* Effect on/off
* REVERSE on/off