Need help?Do you have a question about the Stanton STR8-100 and is the answer not in the manual?
Install the cartridge into the headshell following manufacturer instructions for proper alignment.
Securely lock the headshell assembly into the tone arm tube using the locking nut.
Balance the tone arm and set the counterweight for correct stylus pressure.
Adjust the tone arm height to ensure proper pivot and needle-to-vinyl contact.
Explains strobe dots for speed indication, platter speed selection, and pitch adjustment controls.
Details the headshell, locking nut, tone arm, and counterweight for setup and balance.
Describes analog outputs, digital S/P DIF output, and MP3/Line In connection.
Details rubber protectors designed to prevent damage to turntable edges during scratching.
Provides detailed specifications for the turntable, audio, and tone arm sections.
Outlines the limited warranty period and conditions for the turntable.
To Next Page
General
