Stanton STR8-150 User Manual

DIGITAL TURNTABLE
OWNER'S MANUAL
STR8-150
+
2
g

Stanton STR8-150 Specifications

Turntable Section

starting torque	More than 4.5 kgf.cm
motor type	16 pole, 3 phase, brushless DC motor
platter diameter	332 mm
pitch range	+/-8%, +/-25%, +/-50%
brake type	Electronic brake

Tone Arm Section

effective arm length	194 mm
tracking force adjust range	0-3 g
applicable cartridge weight	13-18 g
frequency response	20 - 20 KHz
channel separation	More than 15 dB
channel balance	Within 2.5 dB at 1 KHz
wow & flutter	Less than 0.1% WRMS
signal-to-noise ratio	More than 60 dB (DIN-B)
needle pressure range	2-5 g

General Specifications

dimensions	450(W) x 353(D) x 146(H) mm
weight	16.4 Kg
power supply	AC 120V, 60Hz
power consumption	14 W

Summary

Important Safety Instructions

Turntable Part Names and Functions

Start/Stop Button

Button to initiate or halt platter rotation.

Strobe Dots

Motor On/Off Switch

Controls motor power, not main unit power. Clockwise to start motor.

Platter Revolution Speeds

Buttons to select 33, 45, or 78 RPM platter speeds.

Reverse Function

Pitch Select

Selects pitch range: +/-8%, +/-25%, or +/-50%.

Pitch Slider

Controls turntable platter speed up or down.

Tone Arm

Pitch ON/OFF

Power Switch

Turns the unit's power on or off, including motor and audio.

Counterweight

Line Out L & R

Phono/Line Switch

Digital Out

Power Cord Connector

Specifications