Stanton ST-100 User Manual

ASSEMBLY
Please check to make sure the following items are included with the main unit in
the carton:
(1) Operating instructions
(2) Platter
(3) Slip mat
(4) Counterweignt
(5) 45 rpm adaptor
(6) AC cord
(7) Connecting cord
FEATURES
1.High torque brush less DC motor
This set uses a high torque brushless DC motor to reach the normal speed of
Rotation rapidly and reduce braking time.
2. +/-8%,+/-16%,+/-25% pitch control
The pitch can be changed in a range of +/-8%,+/-16%,+/-25% using the pitch slider.
A pitch On/off button lets you return to the normal speed of rotation at the
touch of a button.
3. Pitch correction
When pitch correction is on, musical key tone can be kept constant even when
the platter speed is changed with the slider.
4. 78 rpm compatible
This set can play 33, 45 and 78 rpm records.
5. Digital out
The music output is in digital format and can be reproduced on an external digital
processor or an MD recorder.
1
Remover all the parts from the box.
2
Remover the packaging materials from the unit and all the parts.
Set the parts on a stable surface when removing the packaging materials.
Handling the parts roughly could result in scratches or deformation.
3
Check the voltage selector switch is set to an appropriate position.
ex.
U.S.A & CANADA : 115V
EUROPE : 230V
4
Insert the platter onto the motor shaft.
5
Set the slip mat on the platter, lining it up with the motor shaft.
Mounting the counterweight
Mount the counterweight on the shaft at the back of the tone arm.
1

Stanton ST-100 Specifications

Power

power supply	AC 115/230v, 50/60Hz
power consumption	15W

Motor Specifications

motor type	8pole, 3phase, brushless DC motor
starting torque	More than 1.6 kgf.cm
pitch	+/-12%, +/-8%

Performance

wow and flutter	Less than 0.20% WRMS (JIS WTD) with 331/3rpm
signal-to-noise ratio	More than 50dB (DIN-B)
channel separation	More than 15 dB

Weight and Dimensions

dimensions	450(W) x 352(D) x 148(H)mm
weight	9.5Kg
platter diameter	330mm

Summary

Turntable Assembly and Features

Key Features

Highlights features like high torque DC motor, pitch control, and compatibility.

Initial Setup Steps

Steps for unpacking, checking voltage, and installing platter and slip mat.

Mounting the Counterweight

Mounting the Cartridge

Turntable Parts and Functions

Voltage Selector Check

Motor Operation Switch

Start/Stop Button Function

Platter Speed Selection

Key Correction Feature

How to enable/disable key correction during pitch adjustment.

Pitch ON/OFF Control

Explains the ON/OFF states for pitch adjustment.

Pitch Slider Adjustment

Use of the pitch slider to adjust platter speed.

Headshell Locking Mechanism

Pitch Select Control

How to use the pitch select knob for speed variations.

Counterweight Function

Digital Output Terminal

Line / Phono Selector

Line Out Terminal

Power Switch

MP3 Line In

Turntable Operation

Starting Playback

Step-by-step guide to starting record playback.

Adjusting Rotation Speed

Details on adjusting speed with pitch control and observing strobe.

Stopping or Interrupting Playback

Procedure for stopping playback and securing the tone arm.

Connections and Specifications

Analog Connections

Digital Connections

Technical Specifications

Details power, dimensions, weight, motor, torque, pitch, and audio quality.