Star SM-T300 - Printer Features

- 8 -
2.3. Replacing Paper Roll
Cautions :
Be sure to use paper rolls that meet the specications. Do not use paper
rolls that have the paper glued to the core because the printer cannot
detect the paper end correctly.
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover by pushing down the open switch and pull it up.
Caution Symbol
This symbol is placed near the thermal head to indicate that it may be hot.
Never touch the thermal head immediately after the printer has been used.
Let the thermal head cool for a few minutes before touching it.
WARNING
1) Do not touch the tear bar.
• Thereisatearbarinsidethepaperoutletslot.Notonlyshouldyounotput
yourhandinthepaperoutletslotwhileprintingisinprogress,neverput
yourhandintotheoutletevenwhenprintingisnotinprogress.
• Thepapercovercanbeopenedwhenreplacingthepaper.However,since
thetearbarisontheinsideofthepapercover,becarefulnottoplaceyour
faceorhandstooclosetothetearbar.
2) Duringandimmediatelyafterprinting,theareaaroundthethermalheadis
veryhot.Donottouchit,asyoucouldbeburned.
Tear Bar
Open Switch
Paper Cover