Need help?Do you have a question about the Star LC-240 and is the answer not in the manual?
General| Type | Dot Matrix Printer |
|---|---|
| Printing Method | Impact Dot Matrix |
| Print Width | 80 columns |
| Interface | Parallel |
| Number of Pins | 24 pins |
| Noise Level | 55 dB |
| Print Speed | 240 cps |
| Paper Path | Tractor Feed |
| Paper Handling | Continuous Forms, Cut Sheets |
Selects the optimal location for the printer, considering surface stability and power proximity.
Instructions for installing the paper support unit.
Procedure for installing the User Setup Utility software from the floppy disk.
How to save current printer settings to a configuration file.
Process of sending configured settings from the utility to the printer.
Details the initial setup for printing operations within Windows 3.1.
Instructions on how to put the printer into Sleep Mode and its characteristics.
Steps to wake the printer from Sleep Mode and return it to full power.
Details paper specifications for manual and automatic feeding.
Information on selecting the appropriate paper type for printing.
Step-by-step instructions for clearing paper jams from the printer.
Information on setting up and printing with MS-DOS applications.
Guide to selecting the appropriate printer within MS-DOS applications.
Procedure for printing documents when running MS-DOS applications.
Details on how to interrupt and resume printing operations.
Instructions for pausing and resuming print jobs using the control panel.
Procedure for advancing paper line by line using control panel buttons.
How to perform a page skip to start printing on the next page.
Describes how to perform short, long, and hexadecimal dump tests for diagnosis.
Details specifications for the serial impact dot-matrix printer, including pitch and print speed.
Information on graphic printing modes, including uni-directional and bi-directional logic.
Specifications related to the print head, including the number of pins and its lifespan.
Details the character matrix, including pitch and dot patterns for various fonts.
Specifies operating and storage conditions for temperature and humidity.
Pinout details for the optional serial interface, including function and name.
Details the IBM Character Set #2 and Code Page #437, including hexadecimal values.
Information on the Multi-lingual Code Page #850, with characters similar to Code Page #437.
Details the Latin-2 Code Page #852, with character mappings similar to Code Page #437.
Commands for controlling print pitch (character spacing) and print modes.
Commands for setting top/bottom margins and vertical tab positions.
Additional printer control commands not categorized elsewhere.
Specific control commands for NEC printers.
To Next Page
