EasyManua.ls Logo

Star TSP650II series User Manual

Star TSP650II series
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
THERMAL PRINTER
TSP
650II
SERIES
Hardware Manual
Question and Answer IconNeed help?

Do you have a question about the Star TSP650II series and is the answer not in the manual?

Star TSP650II series Specifications

General IconGeneral
Resolution203 dpi
Weight1.72 kg
Print Speed300 mm/sec
Paper Width80 mm
ConnectivityUSB, Serial, Ethernet, Bluetooth
Dimensions142 x 204 x 132 mm
Paper Thickness0.053 to 0.085 mm
Power Consumption1.8 A
CutterAutomatic cutter

Summary

Printer Safety and Regulatory Information

Caution Symbol Explanations

Explains various caution symbols and their meanings related to the printer's operation and safety.

FCC Radio Frequency Interference Statement

Details compliance with FCC rules for radio frequency interference in commercial environments.

CE Marking and European Compliance

Declares compliance with essential requirements of Directive 1999/5/EC for operation in European countries.

Trademark and Manual Notices

Acknowledges trademarks and provides notices regarding manual reproduction, changes, and accuracy.

Unpacking and Installation

Unpacking the Printer

Instructions for checking all necessary accessories after unpacking the printer unit.

Installation Site Considerations

Guidelines for selecting a suitable installation location, power source, and environmental conditions for the printer.

Parts Identification and Nomenclature

Setup Procedures

Connecting Interface Cables to PC

Guides on connecting various interface cables (Parallel, RS-232C, USB, Ethernet) to the PC.

Connecting Interface Cables to Printer

Instructions for connecting different interface cables (Parallel, RS-232C, USB, Ethernet) to the printer.

Connecting the AC Adapter

Step-by-step guide on how to connect the AC adapter for powering the printer.

Power On and Peripheral Device Connection

Procedures for turning the printer on and connecting peripheral devices like cash drawers.

Loading a Paper Roll

Detailed steps on how to correctly load a paper roll into the printer and close the cover.

Bluetooth Setup and Pairing

Guide for configuring Bluetooth settings, including pairing the printer with a master device.

Bluetooth Auto Connection and Resetting

Instructions for setting up Auto Connection, using PIN codes, and resetting Bluetooth settings.

Setup Precautions and Warnings

Important safety precautions and warnings regarding printer setup, operation, and potential hazards.

Attaching the Accessories

Attaching the Holder Plate

Instructions and precautions for securely attaching the holder plate to the printer and mounting it to a wall.

Attaching Rubber Feet and Switch Cover

Guidance on attaching rubber feet for stability and installing a switch cover for preventing accidental operation.

Adjusting the Near-end Sensor

Error Indicators and Troubleshooting

Recoverable Errors

Lists recoverable error conditions, their descriptions, and the corresponding recovery steps.

Unrecoverable Errors

Details unrecoverable errors, causes, and recommended actions, including contacting support.

Paper Jam Management

Preventing and Removing Paper Jams

Tips and procedures for preventing paper jams and safely removing them from the printer.

Releasing the Cutter Lock

Instructions for releasing the auto cutter if it locks up, including manual unlocking procedures.

Maintenance Procedures

Thermal Head Maintenance

Procedures for cleaning the thermal head using alcohol to remove paper dust and ensure print quality.

Platen Roller and Paper Holder Cleaning

Guidance on cleaning the platen rubber roller and paper holder to maintain printer performance.

Related product manuals