Star TSP650 SERIES - User Manual

THERMAL PRINTER
TSP650 SERIES
Hardware Manual

Summary

Unpacking and Installation

Unpacking

Check that all necessary accessories are included after unpacking the unit.

Choosing a Printer Location

Setup

Connecting Cables to PC

Instructions for connecting interface cables (Parallel and RS-232C) to the computer.

Connecting Cables to Printer

Procedure for connecting interface cables to the printer unit.

Installing Printer Software

Step-by-step guide for installing printer driver and utility software from CD-ROM.

Connecting the AC Adapter

Turning the Printer Power On

Loading the Paper Roll

Instructions for loading paper rolls, including 79.5mm and 57.5mm widths.

Consumable Parts and AC Adapter

Thermal Paper Roll Specifications

AC Adapter Specifications

Control Panel and Other Functions

Error Indicators and Recovery

Explanation of recoverable and non-recoverable errors based on LED status and recovery conditions.

Self-Printing Modes

Adjusting the Near-end Sensor

Preventing and Clearing Paper Jams

Preventing Paper Jams

Removing Paper Jams

Step-by-step instructions for clearing a paper jam from the printer.

Releasing a Locked Auto Cutter

Procedure to reset or release the auto cutter if it becomes locked or fails.

Periodical Cleaning

Cleaning the Thermal Head

Instructions for cleaning the thermal head using alcohol and a soft cloth.

Cleaning the Rubber Roller

Specifications

General Specifications

Dip Switch Setting

Parallel Interface DIP Switch Settings

RS-232 C Interface DIP Switch Settings

Memory Switch Settings

Star TSP650 SERIES Specifications