Star TSP650 SERIES - Control Panel and Other Functions; Error Indicators and Recovery

– 19 –
ERROR
FEED
POWER
TSP650
3 FEED button
2 ERROR lamp (Red LED)
1 POWER lamp (Green LED)
6. Control Panel and Other Functions
6-1. Control Panel
1 POWER lamp (Green LED)
Lights when the power is ON.
2 ERROR lamp (Red LED)
Indicates various errors in combination
with POWER lamp.
3 FEED button
Press the FEED button to feed roll pa
-
per.
6-2. Errors
1) Recoverable errors
Error Description POWER Lamp ERROR Lamp Recovery Conditions
Head high temperature
detection
Flashes at 0.5-sec-
ond intervals
OFF Automatically recovered after
the print head has cooled.
Cover open error ON ON Automatically recovered by clos-
ing the printer cover.
Paper out error ON Flashes at 0.5
second intervals
Automatically recovered by
loading a new paper roll, then
closing the printer cover.
Paper near end ON Flashes at 2 sec-
ond intervals
Indicators show that the paper
end is approaching, but the
printer continues to print.
Paper cut error OFF Flashes at 0.125
second intervals
Recovered if the cutter returns to
the home position after turning
the power OFF and ON. (See
Notes 1 and 2.)
Note:
1) If the cutter doesn’t return to the home position or doesn’t perform the initial move
-
ment, it cannot be recovered. See “8-3. Releasing a Locked Cutter (Auto Cutter Mode
only)” on page 25 for details.
2) If the paper is jammed, turn the power off, clear the jammed paper, then turn the power
ON.