Star TSP700 SERIES User Manual

THERMAL PRINTER
TSP700 SERIES
USER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUALE DI ISTRUZIONI
www.simple-shop.si
www.pos-systems.in

Star TSP700 SERIES Specifications

General

Brand	Star
Model	TSP700 SERIES
Category	Printer
Language	English

Summary

Parts Identification and Nomenclature

Consumable Parts and AC Adapter

AC Adapter Specifications

Details specifications for the optional AC adapter, including model name, input, and output.

Connecting Cables and AC Adapter

Interface Cable Connection

Covers ferrite core installation and connecting the interface cable for parallel and serial connections.

Peripheral Unit Connection

Explains how to connect peripheral units using a modular plug and ground wire.

Optional AC Adapter Connection

Provides steps to connect the AC adapter to the printer and power outlet.

Printer Power On Procedure

Details the procedure to turn on the printer using the power switch.

Control Panel and Other Functions

Control Panel Overview

Describes the POWER and ERROR lamps and the FEED button on the printer's control panel.

Printer Error Codes and Recovery

Lists and explains automatically recoverable, recoverable, non-recoverable, and paper detection errors.

Self Printing Modes

Explains how to perform test printing and enter hexadecimal dump mode.

Loading the Roll Paper

Adjusting the Near-end Sensor

Preventing and Clearing Paper Jams

Preventing Paper Jams

Advises on avoiding paper jams by not touching paper during ejection or cutting.

Removing Paper Jams

Provides step-by-step instructions for clearing a paper jam from the printer.

Periodical Cleaning

Thermal Head Cleaning

Details how to clean the thermal head using Isopropyl alcohol for clear printing.

Paper Holder Cleaning

Explains how to remove paper dust from the paper holder and transport section.

Appendix A: Specifications

General Printer Specifications

Lists printing method, speed, dot density, width, paper size, dimensions, weight, and noise level.

Auto Cutter Specifications

Provides specifications for the auto cutter, including cutting frequency and paper thickness.

Printer Interface Types

Specifies the supported interface types: RS232C serial and IEEE1284 parallel.

Electrical Characteristics

Details input voltage, current consumption, and power connector pinout.

Optional Accessories

Lists available optional accessories like wall mounts, stands, and interface boards.

Environmental Requirements

Specifies the operating and storage temperature and humidity ranges for the printer.

Printer Reliability Data

Provides information on MCBF (Mean Cycles Between Failures) and cutter life expectancy.

Black Mark Specifications

Outlines requirements for using black marks for paper positioning and printing.

Appendix B: Dip Switch Settings

Parallel Interface DIP Switch Settings

Details DIP switch settings for configuring the printer's parallel interface.

Serial Interface DIP Switch Settings

Details DIP switch settings for configuring the printer's serial interface.

DIP-SW 3 Configuration

Explains settings for DIP switch 3, primarily for serial interface configuration like baud rate.

Appendix C: Parallel Interface

Appendix D: Serial Interface

RS-232C Connector Pinout

Details the pinout and function of the RS-232C serial connector on the printer.

Serial Cable Connections

Provides recommended interface cable connection diagrams for 25-pin and 9-pin serial ports.

Serial Interface Electrical Characteristics

Defines voltage levels and binary status for data and control signals.

Appendix E: Peripheral Unit Drive Circuit

Appendix F: Memory Switch Settings