Star TSP650 SERIES - Consumable Parts and AC Adapter; Thermal Paper Roll Specifications

– 17 –
5. Consumable Parts and AC Adapter
When consumable parts have run out, use those specified in the table below.
Note:
Access the following URL for the information of the recommended paper.
http://www.star-m.jp/eng/dl/dl02.htm
Make sure that the AC adapter specified in the table is used.
Use of consumable parts or AC adapter which are not specified in the table may result in dam-
age to the printer, fire or electric shock.
5-1. Thermal Paper Roll
(1) Paper roll specification
Thermal paper
Thickness: 65~85 µm (excluding Mitsubishi HiTec F5041)
Width: 79.5±0.5 mm (57.5±0.5 mm when the paper roller holder is used)
Outer roll diameter: ø83 mm or less
Take up paper roll width: 80
+0.5
-1
mm or (58
+0.5
-1
mm when the paper roller holder is used)
Core outer/inner diameter
Core outer Core inner
ø18±1 mm ø12±1 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or its core.
Do not fold the tail end of the paper.
(2) Recommended paper
Manufacturer Product name Quality characteristics/Use
Paper thickness
(µm)
Mitsubishi Paper Mills
Limited
P220AG normal type paper 65 (thickness)
HP220A high image stability paper 65 (thickness)
HP220AB-1 high image stability paper 75 (thickness)
P220AGB normal type paper, card ticket 80 (thickness)
PB670 2 color paper: Red & Black 75 (thickness)
PB770 2 color paper: Blue & Black 75 (thickness)
Mitsubishi HiTec Paper
Flensburg GmbH
F5041 normal type paper 60 (thickness)
Oji Paper Co., Ltd. PD150R normal type paper 75 (thickness)
PD160R high image stability paper 65/75 (thickness)
PD750R 2 color paper: Red & Black 75 (thickness)
PD700R 2 color paper: Blue & Black 75 (thickness)
Nippon Paper Industries TF50KS-E2C normal type paper 65 (thickness)
Kanzaki Specialty Papers
Inc. (KSP)
P320RB 2 color paper: Red & Black 65 (thickness)
P320BB 2 color paper: Blue & Black 65 (thickness)