Star TSP650II series - Bluetooth Setup and Pairing

-
12
-
PAIR
RST
PAIR
RST
PAIRRST
PAIR button
PAIR buttonRST button
LED
<
iOS > < Android >
Flashing green LED
3-7. Bluetooth Settings
(For
Bluetooth Interface Models only
)
(2) Aer turning the printer's power switch on, press and hold the PAIR button on the rear interface of the printer for 5
seconds or more, and then release it. e LED will ash green.
Pair the printer with the master device by following the procedure below.
3-7-1. Pairing using SSP (Simple Secure Pairing) [Default]
(1) Working on the master device, tap [Settings] and set [Bluetooth] to ON.
<
LED
>
Indicates the status of the Bluetooth interface.
Green (on): Not connected.
Green (ashing): Ready to start pairing.
Blue (on): Connected.
Purple (ashing): Auto connection ON.
(3) Pairing will be possible for 60 seconds from when the LED begins ashing green. During this time, execute "Search
for devices" from the master device and tap the relevant device from the displayed list.
Device name: Star Micronics (default)
(4) In an iOS device, aer pairing, the LED will automatically begin ashing blue, and the printer will be automatically
connected. In an Android device, the LED turns blue only while data is sent.
(5) Connect to the printer from the master device application and perform printing. If the printing is successful, the
pairing process has been completed.