- 10 -
2.4. Power Supply
2.4.1. Specied Battery Charger
OUTPUT : DC 8.4 V/0.8 A (CC-CV)
2.4.2. Installing the Battery and the Belt Clip
Cautions :
1) Before installing or removing the battery pack, ensure the printer is OFF.
2) If the printer is not used for long period of time, remove the battery pack
from the printer.
1. To install battery pack, proceed as follows:
- Insert the battery pack in the direction of the arrow.
2. Reverse the order to remove the battery pack.
3
. Attach the belt clip as below.
2.4.3. Recharging the Battery Pack
For recharging the battery pack, install the battery pack in the printer.
Insert the Battery Charger to the charge connector of the printer.
Coin
To Next Page
Loading...
