What to do if StarCharge Battery Charger shows a fault status with red LED lights on?
If the red LED lights are on, indicating a fault, start by checking all potential causes of failure. Ensure that the emergency stop button is not pressed. Then, cut off the power supply to the charger, disconnect the charging connector from the vehicle, and then switch the power supply back on. If the issue persists, it may indicate damage.
What to do if StarCharge Battery Charger connector is dirty or damaged?
If the connector around the security area is dirty or damaged, clean or replace the charging connector.
What to do if StarCharge Battery Charger connector is not properly inserted?
If the connector isn't properly inserted into the vehicle, pull it out and plug it in again.
Explains hazard symbols like warning, caution, hint, and garbage disposal.
Provides essential safety guidelines and warnings for operating the EVSE.
Details the intended applications and operating environments for the EVSE.
Outlines the manual's purpose and target audience.
Lists key technical specifications and features of the EVSE.
Describes the core functionalities and operational capabilities of the EVSE.
Details the technical specifications like charging methods and protection functions.
Identifies and describes the external components of the wall-mounted charger.
Identifies and describes the external components of the pole-mounted charger.
Provides instructions on how to properly store the charging cable and connector.
Details the step-by-step process for starting the EV charger.
Outlines the steps for safely stopping and concluding the charging process.
Presents user instructions including start/stop procedures and safety precautions.
Explains the meaning of different LED indicator colors and effects.
Explains the operation and consequence of using the emergency stop button.
Lists common issues and their corresponding corrective actions for the EVSE.
Details maintenance procedures for the power distribution system.
Covers maintenance checks for cables and wiring connections.
Outlines maintenance for internal circuit components and buttons.
Details maintenance for indicator lights and other auxiliary systems.
Explains the importance and procedures for maintaining the electrical grounding system.
Covers routine checks for the device's physical appearance and cleanliness.
Provides a schedule for routine maintenance tasks based on frequency.
Guides users on what information to gather before contacting customer service.
Provides company contact details including address, website, email, and hotline.
Lists essential requirements for installing the EVSE in various locations.
Specifies recommended components like MCB, RCD, and relevant standards.
Illustrates the electrical wiring diagrams for 7kW and 11kW installations.
Shows detailed views of key components like MCB, Shunt release, and Type-B RCD.
Specifies the input voltage and frequency requirements for 7kW and 11kW models.
Details the working temperature, humidity, and altitude for the EVSE.
Outlines recommended cable specifications and routing.
Provides a step-by-step guide for mounting the charger on a wall.
Specifies mounting heights and provides a drilling center distance diagram.
Details how to thread cables, connect terminals, and install optional network/SIM cards.
Shows detailed wiring diagrams for 7kW and 11kW chargers.
Explains how to install the wiring cover and cable entry clamp.
Guides on hanging the charger and securing it to the wall or pole.
Provides a step-by-step guide for mounting the charger on a pole.
Details the process for installing the fixed base and column for pole mounting.
Explains how to install the front and rear decorative covers.
Lists the relevant international standards the product complies with.
Outlines the terms, conditions, and exclusions for product warranty.
Provides fields for registering product information for warranty purposes.
Lists all components and accessories included with the EVSE.
General| Model | DH-AC0070XG70 |
|---|---|
| Category | Battery Charger |
| Output Power | 70 kW |
| Output Voltage | 200-750V DC |
| Output Current | Up to 100A |
| Efficiency | ≥95% |
| IP Rating | IP54 |
| Protection Features | Overvoltage, Overcurrent, Short circuit |
To Next Page
