PLATE COMPACTOR
8
Add oil according to Engine Manual packed
separately with your unit.
Engine Oil
OIL HAS BEEN DRAINED FOR
SHIPPING.
Failure to fill engine sump with oil
before starting engine will result in
permanent damage and void engine
warranty.
Folding Wheels Kit
Align the holes on the wheel bracket shaft
with the holes on the base bracket. Insert
the 12x80 pin through the holes with one
flat washer on each side of the base bracket
plates. Then install the cotter pin. Using pliers
bend and spread all the cotter pins prongs in
opposite directions.
Ø12 (
×
4)
Base Bracket
X 2
D
Ø12 X 4
Before compacting, fold up the Wheel Kit as
shown.
M5 x 35 X 1
C
Unscrew bolt M5X35 from throttle control.
Secure the throttle control onto the upper
handle with a flat washer 5 and the bolt
M5X35 that just were unscrewed.
Throttle Control
ASSEMBLY
To Next Page
Loading...