CUTTER TRANSPORTATION SAFETY
Use the lifting bail and appropriate lifting equipment to ensure the safe movement of the cutter.
DO NOT use the handle bars and/or front pointer as lifting points,
NEVER tow the saw behind a vehicle.
Ensure that both pointer bars are positioned appropriately to minimize their exposure during
transportation.
Safeguard against extreme cutter attitudes relative to level. Engines tipped to extreme angles may
cause oil to gravitate into the cylinder head making the engine difcult to start.
NEVER transport the cutter with the blade mounted.
ALWAYS know the location of the nearest re extinguisher and rst aid kit. Know the location of the
nearest telephone. Also know the phone numbers of the nearest ambulance, doctor and re department.
NEVER lubricate components or attempt service on a running machine.
MAINTENANCE SAFETY
ALWAYS allow the machine a proper amount of time to cool before servicing.
Keep the machinery in running condition.
Fix damage to the machine immediately and always replace broken parts.
Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fueI
and fuel lters.
SAVE THESE WARNINGS
3
IMPORTANT SAFETY INFORMATION
To Next Page
Loading...
Need help?
General
