GENERAL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in electric shock, re and/or serious injury. Save all warnings and instructions for future
reference.
SAFETY
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be supplied by the operator. Read
carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure
to follow the safety rules and other basic safety precautions may result in serious personal injury.
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
DO NOT allow persons to operate or assemble the product until they have read this manual and have
developed a thorough understanding of how it works.
This equipment should not be operated by person under 18 years of age
NEVER operate this equipment without proper protective clothing, shatter proof glasses, steel- toed
boots and other protective devices required by the job.
The manufacturer does not assume responsibility for any accident due to equipment modications.
Whenever necessary, replace nameplate, operation and safety decals when they become difcult to
read.
ALWAYS check the machine for loosened threads or bolts before starting.
NEVER touch the hot exhaust manifold, mufer or cylinder. Allow these parts to cool before servicing
engine or saw.
High Temperatures allow the engine to cool before adding fuel or performing service and maintenance
functions. Contact with hot components can cause serous bums.
The engine section of this cutter requires an adequate free ow of cooling air NEVER operate the cutter
in any enclosed or narrow area where free ow of the air is restricted. If the air ow is restricted it will
cause serious damage to the saw or engine and may cause injury to people. Remember the cutter’s
engine gives off DEADLY carbon monoxide gas.
1
ALWAYS use extreme caution when working with ammable liquids. When refuelling, stop the engine
and allow it to cool DO NOT smoke around or near the machine. Fire or explosion could result from fuel
vapors, or if fuel is spilled on a hot engine.
ALWAYS refuel in a well-ventilated area, away from sparks and open ames.
NEVER operate the cutter in an explosive atmosphere or near combustible materials. An explosion or
re could result causing severe bodily harm or even death.
Topping-off to the fuel ller port is dangerous, as it tends to spill fuel.
NEVER use fuel as a cleaning agent.
IMPORTANT SAFETY INFORMATION
To Next Page
Loading...
Need help?
General
