Sivu 18 / 23
8. MAINTENANCE OF THE COLLECTING
SWEEPER
8.1. General safety precautions for the use and maintenance
- Comply with the existing laws and regulations and the instructions given in this manual.
- Never go under an unsecured device.
- Always apply the parking brake of the base machine before performing any actions on the device.
- Only use tools that are in proper working order.
- Be careful with the pressurized hydraulic hoses and components.
- Make sure there is no pressure in the hydraulic system, including the pressure accumulator.
- Make sure hydraulic fluids or greases do not leak to the ground.
- Use all necessary personal protectors.
8.2. Tightening torque
Table 1. Tightening torque
8.3. Daily maintenance
In order to prevent further damages, it is important to inspect the device visually for possible defects. Inspect at least the
following daily:
- hydraulic hoses and components for possible leaks
- general mechanical functioning
8.4. Maintenance after first 10 hours of operation
- Lubrication, recommended quality NLGI-2 grade grease or equivalent, as instructed in section 8.6
- Check the bolts for the tightness (table 1)
To Next Page
Loading...
Need help?
General