StarMax MX-100R - Specifications

Modulation Attributes
■ ATSC or J.83B QAM
♦ Modulation Standard ATSC (8VSB) or J.83B QAM
♦ Frequency Range 50 MHz to 860 MHz
♦ Channel Bandwidth 6 MHz
♦ Technique ATSC 8VSB
J.83B 64QAM, 256QAM
♦ MER ≥35 dB
■ Audio Codec
Audio encoding is automatically selected by the Modulator to reach the best quality according to
modulation standard.
AC3 2.1 Dolby Digital Audio coding applies to ATSC (8VSB) broadcasting in North America.
MPEG MPEG-1 Layer 2 audio coding applies to DVB-T broadcasting in Europe and South America.
AAC Advanced Audio Coding for MPEG-4 applies to ISDB-T broadcasting in South America and certain
ATSC (8VSB) broadcasting in North America.
■ Video Quality
Video quality is optimized by determining the size and the speed to transmit MPEG packets to the TV.
The packet latency and delay variation are adjusted automatically by the Modulator to reach the best
video quality and performance on the TV.
4
MX-100R, MX-200 and MX-300 HD Modulator
Specifications
Note: Specifications are subject to change without notice.
Note: In order to display video normally on TV
• Signal accepted by the TV must comply with standard MPEG-2 encoding
• The video content is not protected under High-Bandwidth Digital Content Protection (HDCP)
agreement
Resoluon 576i PAL 480i NTSC
Input Output
1920 x 1080_60p 1920 x 1080_30p
1920 x 1080_50p 1920 x 1080_25p
1920 x 1080_60i 1920 x 1080_30i
1920 x 1080_50i 1920 x 1080_25i
1280 x 720_60p 1280 x 720_30p
1280 x 720_50p 1280 x 720_25p
Aspect Rao
Bit Rate
Encoding
Sampling Rate
Bit Rate
HDMI
CVBS (Oponal)
Video
50 to 900 MHz, 1 kHz Step
70 to 100 dB
µ
V, 1 dB Step
Output Frequency
Output Level
Resoluon
MPEG-2
CVBS (PAL,
NTSC)
Audio
MPEG-1 Layer 2, AAC, AC3
48 kHz
MPEG-2; 5 to 15 Mb/s compression rate
MX-100R - HDMI x 1, 75Ω F x 2, Mini USB x 2
MX-200 - HDMI x 1, RCA AV x 1, 75Ω F x 2, 1000Base-T RJ-45 x 1
MX-300 - HDMI x 1, RCA AV x 1, 3G-SDI x 1, 75Ω F x 2, 1000Base-T RJ-45 x 1
16:9, 4:3
64, 96, 128, 192, 256, 320 kbps
Encoding
Interface
2 to 20Mbps
12 VDC, 1A
MX-100R - 5.03" x 3.03" x 1.10" (128 x 77 x 28 mm)
MX-200 - 5.98" x 4.33" x 1.26" (152 x 115 x 32 mm)
MX-300 - 7.09" x 4.06" x 1.34" (180 x 103 x 34 mm)
MX-100R - 0.55 lb (250g)
MX-200 - 0.88 lb (400g)
MX-300 - 1.01 lbs (460g)
0 to 50 °C (Operaon)
-20 to 80 °C (Storage)
General
Power Supply
Dimensions without
Brackets
Weight
Temperature