S8010
99
ENGLISH
Some of the symbols below may be mentioned in this instruction manual.
Their meanings should be known by the machine user. It will allow proper
and safe use of machine, avoiding risks of accidents or damages to it.
This product is called a power tool, as well as machine, according IEC
60745-1.
SAFETY:
SYMBOL DESIGNATION DESCRIPTION
V Volts Voltage
A Ampares Current
Hz Hertz Frequency (cycles per second)
W Watts Power
Alternate current
Type and characteristic of current
Continuous current
n
o
rpm Revolution per minute (NO LOAD)
kg kilogram
Weightlb pounds
oz ounce
n rpm Revolution per minute (rpm)
Safety Glasses
This machine operation may result in eject-
ing chips or foreign objects against the us-
er’s eyes. It may result in serious injuries and
damages.
Protective Gloves
ALWAYS USE safety glasses or face shield
and protective gloves.These PPE - Personal
Protective Equipment must present Approval
Certifi cate, duly approved by the authority and
applicable laws of each country.
To Next Page
Loading...