S8010
113
ENGLISH
FIG 02
OPERATION:
BATTERY PACK INSTALLATION:
CAUTION:
1. LOCK the Trigger Switch of the Drill/Driver, putting the button of
Direction of Rotation Selector (NORMAL / LOCK / REVERSE) the center
position (LOCK);
2. ALIGN the raised portion on the Battery with the grooves on the
bottom of the Drill/Driver. After INSERT the Battery in the machine as shown
in fi gure 02.
MAKE SURE that the Battery is locked in the place and
locked on the machine, before starting any operation.
Incorrect installation of Battery may cause damage to
internal components.
LOCK
UNLOCK
To Next Page
Loading...