StarTech.com CPNT410IR - Introduction; Features; Before You Begin; System Requirements

IInnttrroodduuccttiioonn
Thank you for purchasing a StarTech.com 4-to-1 Component YPbPr A/V switch. This
product allows you to connect up to four A/V devices that have Component Video and
either Digital Coax audio or RCA audio output to a display using a single set of inputs.
You can use either the front panel select button, the included remote control, or an
existing component remote to toggle between inputs, using the remote learning feature.
This product is perfect for use with DVD players, VCRs, game consoles and other video
devices when you have a limited number of inputs available on your TV or other display.
FFeeaattuurreess
• Connect up to four devices to your TV using a single set of inputs
• You can program the video switch to work with your existing universal remote
• Maintains clear audio and video signals for excellent performance
BBeeffoorree YYoouu BBeeggiinn
System Requirements
• A display that has at least one set of inputs that accommodate RCA audio or Digital
Coax audio and component video
• A set of cables for each device to be connected to the switch that use RCA audio or
Digital Coax audio and component video
• A set of cables to connect the switch to the display, using RCA audio or Digital Coax
audio and component video
NOTE: If you are using Digital Coax to connect a device to the switch, Digital Coax
will be required between the switch and the display in order for the selected
component to properly output an audio signal. Similarly, if you are using RCA
audio to connect between a component and the switch, RCA audio must be used
between the switch and the display.
Contents
This package should contain:
• Component/Audio Switcher (1)
• 9V DC Power Adapter (1)
• Instruction manual (1)
• Remote Control (1)
Instruction Manual
1