connected to. Most displays will have their A/V inputs marked with a number, so
ensure the input selected on the screen matches the physical connection between the
switch and the display.
3) Verify cable connections between the video switch and display are snug.
Some of the devices connected to the switch do not appear on the display when
they are connected
.
1) Ensure the device you selected is powered on and that it has media inserted (if
applicable: tape, DVD, etc.). If needed, press play on the device to ensure an image
is displayed.
2) Ensure that all the cable connections between devices and the switch are correct and
snug. Also ensure that the device is connected to the set of inputs that you selected
on the switch.
Video or audio quality is poor.
1) Ensure the connections between the devices and the switch, and the switch and the
display, are snug.
2) Try using a higher quality A/V cable to make the connection between the devices and
the switch for the best possible performance.
Instruction Manual
4
To Next Page
Loading...
