StarTech.com SDOCK2U313R User Manual

Quick start guide
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

StarTech.com SDOCK2U313R Specifications

General

Chipset	ASMedia - ASM1352R
Interface	USB 3.1
Product type	HDD duplicator
Product color	Black
Transfer rate	10000 MB/s
LED indicators	HDD, Power, Status
Number of fans	0 fan(s)
Port multiplier	No
Housing material	Plastic
USB connector type	USB Type-B
Duplicator operating modes	Copy
Sustainability certificates	RoHS
Number of simultaneous copies	2 copies
Supported HDD sizes	2.5, 3.5 \
Supported HDD interfaces	Serial ATA, Serial ATA II, Serial ATA III
Input current	1.5 A
Output current	3 A
Output voltage	12 V
Power plug type	Type M
AC input voltage	100-240 V
Included power plug types	AU, EU, NA, UK
Power consumption (typical)	36 W
Package depth	166 mm
Package width	300 mm
Package height	88 mm
Package weight	992 g
Cables included	USB
AC adapter included	Yes
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE, FCC, UL, REACH
Master (outer) case width	464 mm
Master (outer) case height	204 mm
Master (outer) case length	617 mm
Quantity per master (outer) case	10 pc(s)

Weight and Dimensions

Weight	508 g
Dimensions (WxDxH)	132 x 142 x 70 mm