StarTech.com SDOCK2U313R User Manual

Quick start guide
1
Introduction
Packaging contents
• 1 x USB 3.1 duplicator docking station
• 1 x universal power adapter (NA/EU/UK/AU)
• 1 x USB C to B cable
• 1 x USB A to B cable
• 1 x quick start guide
System requirements
• Computer system with a USB port
• Up to two 2.5 in. or 3.5 in. SATA hard drives (HDD) or solid-state drives (SSD)
The SDOCK2U313R is OS independent and doesn’t require any additional drivers or
software.
Note: To obtain the maximum USB throughput, you must use a computer with a USB
3.1 Gen 2 (10Gbps) port.
System requirements are subject to change. For the latest requirements, please visit
www.startech.com/SDOCK2U313R.

StarTech.com SDOCK2U313R Specifications

General

Chipset	ASMedia - ASM1352R
Interface	USB 3.1
Product type	HDD duplicator
Product color	Black
Transfer rate	10000 MB/s
LED indicators	HDD, Power, Status
Number of fans	0 fan(s)
Port multiplier	No
Housing material	Plastic
USB connector type	USB Type-B
Duplicator operating modes	Copy
Sustainability certificates	RoHS
Number of simultaneous copies	2 copies
Supported HDD sizes	2.5, 3.5 \
Supported HDD interfaces	Serial ATA, Serial ATA II, Serial ATA III
Input current	1.5 A
Output current	3 A
Output voltage	12 V
Power plug type	Type M
AC input voltage	100-240 V
Included power plug types	AU, EU, NA, UK
Power consumption (typical)	36 W
Package depth	166 mm
Package width	300 mm
Package height	88 mm
Package weight	992 g
Cables included	USB
AC adapter included	Yes
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE, FCC, UL, REACH
Master (outer) case width	464 mm
Master (outer) case height	204 mm
Master (outer) case length	617 mm
Quantity per master (outer) case	10 pc(s)

Weight and Dimensions

Weight	508 g
Dimensions (WxDxH)	132 x 142 x 70 mm