StarTech.com SDOCK2U313R User Manual

Quick start guide
5
4. A dialog window appears and asks you to initialize the drive. Depending on the
version of Windows that you’re running, you have the option to create either an
MBR or a GPT disk.
Note: GPT (GUID partition) is required for drives larger than 2 TB but GPT isn’t
compatible with some earlier versions of operating systems. MBR is supported by both
earlier and later versions of operating systems.
5. Locate the disk that is labeled Unallocated. To conrm that the drive is the correct
one, check the drive capacity.
6. Right-click the section of the window that says Unallocated and click New Partition.
7. To initialize the drive in the format of your choice, complete the on-screen
instructions.
When the drive is successfully installed, it appears under My Computer or Computer
with a drive letter assigned to it.

StarTech.com SDOCK2U313R Specifications

General

Chipset	ASMedia - ASM1352R
Interface	USB 3.1
Product type	HDD duplicator
Product color	Black
Transfer rate	10000 MB/s
LED indicators	HDD, Power, Status
Number of fans	0 fan(s)
Port multiplier	No
Housing material	Plastic
USB connector type	USB Type-B
Duplicator operating modes	Copy
Sustainability certificates	RoHS
Number of simultaneous copies	2 copies
Supported HDD sizes	2.5, 3.5 \
Supported HDD interfaces	Serial ATA, Serial ATA II, Serial ATA III
Input current	1.5 A
Output current	3 A
Output voltage	12 V
Power plug type	Type M
AC input voltage	100-240 V
Included power plug types	AU, EU, NA, UK
Power consumption (typical)	36 W
Package depth	166 mm
Package width	300 mm
Package height	88 mm
Package weight	992 g
Cables included	USB
AC adapter included	Yes
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE, FCC, UL, REACH
Master (outer) case width	464 mm
Master (outer) case height	204 mm
Master (outer) case length	617 mm
Quantity per master (outer) case	10 pc(s)

Weight and Dimensions

Weight	508 g
Dimensions (WxDxH)	132 x 142 x 70 mm