Instruction Manual
1
Introduction
Packaging Contents
• 1 x VGA Video Extender Local Unit
• 1 x VGA Video Extender Remote Unit
• 1 x Mounting Bracket Kit
• 2 x Power Adapters
• 1 x Instruction Manual
System Requirements
• VGA enabled video source and display
• Available AC electrical outlet at local and remote locations
• VGA male/female cable to connect video source to extender
• VGA male/male cable(s) to connect display devices to extender
Installation
Hardware Installation
This product is composed of two dierent units: the Local Unit and the Remote Unit. The
Local Unit takes the output from a VGA signal source (usually a computer) and transmits
it to the Remote Unit over Category 5 Ethernet cable. The remote displays (monitor,
projector, etc) connect to the Remote Unit using standard VGA connections and displays
the image from the local computer onto the remote displays.
To Next Page
Loading...
