Page 14
The Chill Timer is adjustable in 5 second steps between 0 and 90 seconds.
Note that a lid switch must be fitted if this function is required.
If a lid switch is fitted but the Chill feature is not required, set the time to 00 sec.
Press the FILL key when finished.
Refrigerator Number
The digital display will show (e.g.)
This number will be printed in the page headings of the data log when it is printed out. A unique number should
be chosen for each refrigerator so that printouts from different refrigerators may be identified.
If the refrigerator is linked to a PC it will only respond to commands which contain the correct refrigerator
number (unless set to 00).
Use the TEST key to increase the Refrigerator No.
Use the MUTE key to decrease the Refrigerator No.
The refrigerators No. is adjustable between 00 and 99.
Press the FILL key when finished.
Clock Setting
Display will show (e.g.)
Use the TEST key to increment the date.
Use the MUTE key to decrement the date.
(‘r’ indicates Refrigerator No.)
(‘d’ indicates day of month)
To Next Page
Loading...
