Page 16
Use the MUTE key to decrement the minute.
Press the FILL key when finished.
Log Interval
Display will show (e.g.):
The logging interval is selectable from 5, 10, 15, 30, 60 minutes or 2, 4, 6, 12, 24 hrs or No Logging.
At each logging point the Time and date, Temperature and Level are recorded. If filling is in progress this is
also recorded.
Use the TEST key to increase the Logging Interval.
Use the MUTE key to decrease the Logging Interval.
Set the interval to 00 if no logging is required.
Press the FILL key when finished.
A long beep will be heard and the digital display will revert to its temperature display mode.
This concludes the Set-up Procedure.
Assuming that all is in order and sensible timer and temperature settings have been selected the alarm lamps
and audible alarm should be off.
(‘L’ indicates Log Interval)
To Next Page
Loading...
