Need help?Do you have a question about the Statpower PROwatt 250 and is the answer not in the manual?
Power| output power continuous | 225 Watts |
|---|---|
| output power surge | 500 Watts |
| output voltage | 115 VAC RMS± 5% |
| output frequency | 60 Hz ± 0.01% |
| input voltage | 10 - 15 VDC |
| efficiency | 90% |
| no-load current draw | <0.07 Amps |
| low battery alarm | 10.7 Volts |
| low battery shutdown | 10 Volts |
Weight and Dimensions| dimensions | 1.5 x 4.5 x 6 inches |
|---|---|
| weight | 28 oz (0.87 kg) |
Details the two-stage DC-to-DC and inverter conversion process.
Explains the "quasi-sine wave" or "modified sine wave" output of the inverter.
Specifies voltage, current, and type of DC power source needed for operation.
Guides on connecting the inverter via cigarette lighter or direct wiring.
Instructions for plugging AC equipment into the inverter's receptacle.
Recommends optimal environmental conditions and location for the inverter.
Advises on matching equipment load to inverter capacity and overload protection.
Discusses expected battery life, charging recommendations, and low battery alarms.
Addresses issues like audio buzz and TV interference with potential causes and solutions.
Provides a structured guide for common issues like lack of power output and low voltage.
Details the warranty period, coverage, exclusions, and voiding conditions.
Explains the process for obtaining service, including contact details and required information.
Lists and briefly describes other product lines offered by Statpower Technologies.
Lists technical specifications including output power, voltage, frequency, and dimensions.
To Next Page
