To select an option, the ENTER key sequence is used.
Now press ENTER.
The display will be seen to stop flashing
momentarily before returning to Menu
mode. Instead of returning back to the
SENSor entry, rANgE will now be displayed. The system has automatically stepped
on to the next entry to speed the process of programming.
This method of editing parameters is repeated broadly throughout the menu structure,
with the exception of programming number fields which will be dealt with next.
The method of editing a field is a bit different, though as easy as for any other entry.
As before, we will see it through an example.
Cycle around the Inputs menu until Hi is displayed.
This is the engineering high range value,
although its function is unimportant in the
tutorial, it simply provides a numeric field to
edit.
As before pressing SHIFT takes us into the edit mode.
The value on the display will have its most
significant digit flashing and represents the
value previously entered for the engineering units high range.
As before, the INC key modifies the editable value, but this time, this will only be the
digit flashing. This digit is said to be under
the edit cursor.
To move the edit cursor, press the SHIFT key.
TUTORIAL
Page 32
To Next Page
Loading...
Need help?
General